Juniper Networks J6350 Uživatelský manuál stáhnout pdf (Strana 201)

Figure 78: Location of J2320 and J2350 Internal Compact Flash

To replace the internal compact flash:

1. Place an electrostatic bag or antistatic mat on a flat, stable surface.

2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and

connect the strap to the ESD point on the chassis, or to an outside ESD point if

the router is disconnected from earth ground. For more information about ESD,

see “Preventing Electrostatic Discharge Damage” on page 251.

Press and release the power button to power off the router. Wait for the POWER

LED to turn off.

4. Remove the power cable from the power source receptacle.

5. Remove chassis cover. (See “Removing and Replacing the Chassis Cover on

J2320 and J2350 Routers” on page 176.)

WARNING: If the fans are still rotating, wait until they stop before proceeding with

the next step.

6. With a Phillips screwdriver, loosen the pan head screws that secure the internal

compact flash slot cover.

7. Remove the compact flash slot cover.

8. Gently grasp the compact flash, and slide it out of the compact flash slot (see

Figure 79 on page 180).

Replacing Internal Compact Flashes on J2320 and J2350 Routers ■ 179

Chapter 10: Replacing Hardware Components

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 331 332

Žádné komentáře

Juniper Networks J6350 Uživatelský manuál Strana 201